IEC Separable Connectors 8.7 kV/15 kV, 630A, Front T-Body Connector provide fully shielded, fully insulated and fully sealed connections between power cables and switchgear (inlet and outlet epoxy bushings) (such as ring main units, box-type substations, cable branch boxes, etc.).
IEC Separable Connectors 8.7 kV/15 kV, 630A, Coupling (Rear) T-Body Connector can be connected with front connector or another rear connector to provide cable branches, but can not be connected with bushing directly. It 's tail can be sealed with an insulation end cap or connect with an elbow lightning arrester.
35kV Premoulded Termination are suitable for 21/36kV, 26/36kV single-core and three-core XLPE cable splicing.
15kV cold shrinkable termination are suitable for the connection of 3.6/6kV, 6/6kV, 6/10kV, 8.7/15kV single core/three core XLPE power cable.
15kV Outdoor heat-shrinkable terminations are suitable for 3.6/6kV, 6/6kV, 6/10kV, 8.7/15kV single-core and three-core XLPE cable splicing.
35kV Premoulded Cable Joint are Suitable for 21/36kV, 26/36kV single-core and three-core XLPE cable splicing.
Elbow connectors are suitable for 15kV and 24kV electrical systems
Straight connectors are suitable for 15kV and 24kV electrical systems with a continuous 250A rated current. They are used for 250A outlets of uropean-style ring main unit or dedicated cable outlet termination of combined transformers adopting European-style RMU. Applicable cable cross section: 25-120mm²