Assembly Type GIS Termination

Product introduction of GIS Termination:

The terminal stress cone is made of imported EPDM (ethylene propylene diene rubber) with high pressure injection molding. The spring cone is pressed on the conical wall of the epoxy sleeve, which overcomes the defects of the elastic relaxation of the stress cone due to the aging of the material and the poor contact between the stress cone and the semi-conductive layer outside the cable, so as to ensure the long-term safe and stable operation of the terminal. Terminal for all dry structure, eliminate leakage problem; Compact structure, light weight, small volume, greatly reduce the installation space; The connection mode between the terminal and the cable is plug type, easy to install, easy to maintain; Plug-in GIS terminal is also suitable for the connection of power cable and transformer, which eliminates oil/oil bushing or oil/gas bushing (elephant trunk), saving a lot of space; After the short plug-in GIS terminal is equipped with a wire rod, it is also suitable for the GIS equipment matching the long GIS terminal.

Product Application of GIS Termination:

YJZGG(D) type: indoor use

Rated voltage: 48/66kV, 56/77kV, applicable cable section: 95 ~ 1600mm2

Rated voltage: 64/110kv, 76/138kv, 87/150kv, applicable cable section: 240 ~ 1600mm2

Rated voltage: 127/220kV, applicable cable section: 240 ~ 3000mm2

Rated voltage: 290/500kV, applicable cable section: 800 ~ 3000mm2

Product Features of GIS Terminal:

1. The terminal stress cone is made of imported EPDM (ethylene propylene diene rubber) with high pressure injection molding, and the spring cone is pressed on the conical wall of the epoxy sleeve, which overcomes the defects such as elastic relaxation caused by the aging of the stress cone and poor contact between the stress cone and the semi-conductive layer outside the cable, so as to ensure the long-term safe and stable operation of the terminal;

2. The terminal is fully dry structure, eliminating the leakage problem;

3. Compact structure, light weight, small volume, greatly reducing the installation space;

4. The connection mode between terminal and cable is plug type, easy to install and maintain;

5. Plug-in GIS terminal is also suitable for the connection of power cable and transformer, which eliminates oil, oil bushing or oil, gas bushing (elephant trunk), saving a lot of space;

6. After the short plug-in GIS terminal is installed with a wire rod, it is also suitable for the GIS equipment matching the long GIS terminal.

Technical Data：